How we work: how I repair your refrigerator, washer or cold room in Jeddah

Seven clear steps from the first message to a working appliance. I repair at your home, in front of you, and explain the fault, the solution and the price before any repair.

The steps of an on-site repair

Each step with what's on your side and what's on mine, so you know what to expect at every stage.

  1. Message me on WhatsApp or call

    The fastest way is WhatsApp. Write the appliance type and what is happening to it. You don't need technical terms, just describe the fault in your own words.

    You
    The appliance type and the fault
    Me
    I read your description and reply
  2. Describe the fault or photograph it

    The clearer the description, the more accurate the first assessment. Photograph the appliance and any error code on the washer or board, and say when the fault started.

    You
    A description or a photo of the appliance
    Me
    I form a first idea of the fault, often from your description alone
  3. Agree on the time and place

    We set the day and time that suit you. Since I don't have a car, we arrange the location by phone before I come. I serve Al Safa and the surrounding area, and for other districts we agree in advance.

    You
    Your district, address and a suitable time
    Me
    I confirm the appointment with you
  4. Inspect the appliance and find the fault

    I inspect the appliance at your home while you are present, and pin down the cause of the fault before changing any part.

    You
    Be present if you can
    Me
    The inspection and finding the cause
  5. I tell you the solution and the price before starting

    I explain the fault in plain language, what the appliance needs, and what the repair costs. If a part can be repaired or replaced, I give you the options.

    You
    The decision: accept or decline
    Me
    The explanation, the options and the price
  6. The repair, in front of you

    I start the repair once you agree, and you see every step and every part that is changed, inside your home.

    You
    Watch if you like
    Me
    The repair and an explanation of what I do
  7. Test the appliance and explain what was done

    When I'm done I run the appliance and check that it works, and explain what was wrong, what was fixed, and any tip that helps you use it.

    You
    Check that the appliance works
    Me
    Running the appliance and explaining what was done

What I need to know, by appliance

This information saves time and helps me understand the fault from the first message.

Refrigerators

  • Type: double-door, side-by-side or deep freezer
  • What you notice: no cooling, frost, a water leak or a noise
  • When the fault started and whether it repeats
  • A photo of the refrigerator and its model label, if possible
Service details

Automatic washing machines

  • Type: front-load or top-load
  • What happens: no spin, no drain, a leak, or it won't start
  • A photo of the error code on the display
  • At which stage of the cycle the machine stops
Service details

Cold rooms

  • Type of business: restaurant, grocery, shop or warehouse
  • The required and current temperature, if known
  • What you notice: a compressor not running, a fan, frost or a leak
  • A photo of the control board and the unit, if possible
Service details

Control boards

  • The appliance the board belongs to
  • What the board shows: a display, lights, a message or nothing
  • When the fault started and whether a power cut came before it
  • A photo of the board, if possible
Service details

Repair or replace a part?

Not every fault needs a new part, and not every part is worth repairing. After the inspection I tell you whether the fault is simple and can be repaired, or whether a part must be replaced, and I give you the available options.

With control boards in particular, I decide whether the board can be repaired or must be replaced, because the answer differs from one board and one fault to another.

In every case you know the solution and the cost before I start, and the final decision is yours.

When should you call a refrigeration or washer technician?

Don't wait for the fault to grow. These signs call for an inspection.

Food spoils quicklyIt means the cooling is weak and the refrigerator needs checking.
A strange noise from the compressorA repeated or loud noise is a warning before bigger damage.
Water under the washer or refrigeratorA small leak can turn into a problem for the floor and the connections.
An error code on the washerPhotograph it and send it to me. I can often tell the problem from it.
The appliance cuts out and restarts oftenThe cause may be a thermostat, a control board or gas pressure.
The cold room can't hold its temperatureA quick check protects your stock from spoiling.

Tips before I arrive

Simple things that protect your appliance and your stock, and save time.

Unplug the appliance if it looks unsafeIf you notice a burning smell or water near the power socket, unplug the appliance and then contact me.
Move sensitive foodIf the refrigerator has stopped cooling, move sensitive food somewhere cold so it doesn't spoil.
Open the door lessOpening a refrigerator or cold room door often during a fault raises the temperature quickly.
Leave space around the applianceClearing the area around the appliance makes the inspection easier and saves time.
Don't open the control boardOpening the board or tampering with the wiring can make the fault worse. Photograph it and send it to me.
Have the error code readyA photo of the code or the display message saves a lot of questions.

Questions about how I work

Answers to what people ask most before booking.

How do I book a fridge or washer technician in Jeddah?

Message me on WhatsApp or call +966577285828, tell me the appliance type and the fault, and then we agree on a time.

Do I need to send photos before the visit?

It isn't required, but photos help me understand the fault in advance, especially the error code on washers and the model label on refrigerators.

Will I know the repair price before you start?

Yes. I identify the fault first, then tell you the solution and the price before any repair. The decision is yours.

Do I need to be present during the repair?

It's preferable, since I repair the appliance in front of you and explain the fault and what was changed.

How long does a repair take?

It depends on the fault and the parts needed. Once I've identified the fault, I tell you what the appliance needs before I start.

Do you serve other districts of Jeddah?

Al Safa and the surrounding area are my base. For other districts we agree in advance by contacting me, bearing in mind I don't have a car for travel.

Do you handle shop cold rooms the same way?

Yes, the same steps. I need to know the required temperature and what the room is doing, and I keep in mind that a stopped room can put your stock at risk.

See all frequently asked questions

Ready to start? Tell me the fault

The first step is a single message: the appliance type and the fault.