Frequently asked questions about fridge, washer and cold room repair in Jeddah
Clear answers on booking, cost, common faults and service areas. Can't find your question? Write to me on WhatsApp.
About the service
Who is the technician and how experienced is he?
An Egyptian technician with over 25 years of experience repairing refrigerators, automatic washing machines, cold rooms and control boards, based in Al Safa, Jeddah.
More about usIs the repair done at home?
Yes. Most faults are repaired at your home, in front of the owner, with an explanation of the fault before I start.
How it works in detailWhich appliances do you repair?
Refrigerators of all types (double-door, side-by-side and deep freezers), front-load and top-load automatic washing machines, cold rooms, and control boards for appliances and cold rooms.
All servicesDo I need to be present during the repair?
It's preferable, since I repair the appliance in front of you and explain the fault and what was changed.
Booking and cost
How do I book an appointment?
Message me on WhatsApp or call +966577285828, tell me the appliance type and the fault, and then we agree on the day and time.
How it works in detailHow do I know the repair cost?
The cost depends on the fault and the parts needed. I identify the fault first, then tell you the solution and the price before any repair.
Do I need to send photos?
It isn't required, but photos help me understand the fault in advance, especially the error code on washers and the model label on refrigerators.
Can you tell the fault from a description before the visit?
I can often form a first idea from your description and photos, but the final diagnosis comes after inspecting the appliance.
What if I don't agree to the solution or the price?
The decision is yours. I explain the fault and the available options, and I start the repair once you agree.
Refrigerators
Why isn't my refrigerator cooling?
The cause could be a compressor that isn't running, a stopped fan, a faulty thermostat or sensor, or low gas. Only an inspection pins down the cause accurately.
Details: Refrigerator repairDoes weak cooling mean the gas is low?
Not always. That's why I inspect the appliance first, check the gas pressure and refill it only when needed.
Why does ice build up in the freezer?
Possible causes are a fault in the defrost system or a door gasket that doesn't seal tightly. I check the defrost elements and the gaskets.
Why is my refrigerator leaking water inside?
Often a blocked or frozen defrost drain, and sometimes a damaged gasket. I check the drain and where the water comes from.
Do you repair side-by-side refrigerators and deep freezers?
Yes. I work on double-door, side-by-side and deep freezer units.
Automatic washing machines
My automatic washer doesn't spin. What's the cause?
This is a common fault. The check covers the drain pump, the belts, the motor and the control board.
Details: Automatic washing machine repairWhy won't my washer drain?
The cause may be the drain filter, the pump or the drain hoses. I check them and tell you what's needed.
What should I do when an error code appears?
Photograph the code and send it to me with the washer type. I can often tell the problem from it.
Why is my washer leaking?
The leak may come from the door or its gasket, the drain hoses, or the bottom of the machine. I find the source before any repair.
Do you repair both front-load and top-load washers?
Yes. I repair automatic washing machines of both types: front-load and top-load.
Cold rooms and control boards
Do you work on cold rooms for restaurants and shops?
Yes. I repair and maintain cold rooms and their control boards, for restaurants, groceries, shops and warehouses.
Details: Cold room maintenanceMy cold room doesn't reach the required temperature. What should I do?
Contact me promptly, since a stopped room can put your stock at risk. Possible causes include compressor problems, the evaporator fan or a frosted evaporator, and I check these along with the pressure.
Can a control board be repaired or must it be replaced?
I test it first, then tell you the best option, whether repairing the board or fitting a replacement. The decision is yours.
Details: Control boardsDo you adjust the board's operating settings?
Yes. Adjusting the operating settings is part of the control board service, along with timer and sensor faults.
Area and contact
Which areas do you serve?
Al Safa in Jeddah and the surrounding area. For other districts we agree in advance by contacting me.
How does the visit work if you don't have a car?
I don't have a car for travel, so we arrange the time and place by phone before I come.
Where are you located?
Al Safa, Jeddah, Al Arbaeen St. (Prince Mutaib), next to Al Jedaani Hospital, behind Naama.
Contact pageHow can I get in touch?
WhatsApp or a phone call on +966577285828, and I have a Facebook page. WhatsApp is the fastest way.
Contact pageNo matching results. Write your question to me on WhatsApp and I'll reply.
Ask me on WhatsAppDidn't find your answer?
Write the appliance type and the fault, or your question, and I'll reply.